

Syringe
The syringe is made:
Cylinder: rubber compound (plastisol), Tip: plastic
The syringe is intended for medical use in medical institutions and for individual use.
For irrigation and suction of fluid from the body cavities.
Before using the syringe bottle, disinfect by boiling in distilled water for 10 (± 5) minutes.
For disinfection in hospitals use the method of immersion in a 3% solution of hydrogen peroxide or in a 3% solution of chloramine for 80 (± 5) minutes. with the subsequent rinsing in flowing drinking water.
Before using the syringe, grease the tip with neutral grease (petroleum jelly, lanolin). After applying the syringe, rinse with hot water to remove the medicinal solution and dry. Rinse the tip with soap and water and rinse with clean running water.
The syringe should not be in contact with the drug solution for more than 30 minutes.
The syringe should not be exposed to direct sunlight, gasoline or other solvents.
Do not use syringes for oily substances!
Store indoors at temperatures from + 5 ° C to + 25 ° C and relative air humidity not exceeding 80% away from heating devices.